A guest walks up, picks a design and a size, and about two minutes later walks off wearing it. Getting to that point in Orlando takes a few weeks of planning and one long freight trip.
Before the event
You send the logo or artwork, and we proof it and set it up for screens or DTF film. We confirm garments and sizes, the stations that fit your schedule, and the venue's load-in rules. Then the gear ships from La Habra, and the crew books flights to arrive the day before.
On site
- Load-in: presses, blanks, tables and crew come in through your dock or service corridor and build a station in about a 10×10 space.
- Guests choose: a size, a garment, a design or a patch. The choosing is part of why they keep it.
- We print: up to 60 pieces an hour per press, and 100+ an hour from the standard two-press station.
- They wear it: the finished piece comes off the platen still warm.
What the venue provides
About 10×10 ft per station, two dedicated 120V/20A circuits, a level floor and a line path that doesn't block doors. In Orlando, add cover for any outdoor setup in storm season. See venue requirements.
Picking a method
One design at volume suits screen printing. Full color or names suit DTF. A hat bar or embroidery makes it a premium gift. Read how live printing works or tell us about your Orlando event.
Orlando planning
Orlando load-ins
At the Orange County Convention Center on Orlando's International Drive, the freight goes through the show's dock schedule and drayage. At a resort it usually comes through a service corridor in a set window. Either way we need the times in writing before the gear ships.
Our shop is in La Habra, 2,179 straight-line miles from Orlando. The presses, heat presses, blanks and tables ship as freight, and the crew flies in the day before load-in. A station needs about 10×10 ft and two dedicated 120V/20A circuits.